fbpx
Sale!

Better Connected™ Suzuki 2013+ NMEA Complete Bundle for Lowrance/Garmin/Humminbird/Simrad

From: CAD $258.05

This is our Better Connected™ Complete NMEA Kit for 2013 and newer Suzuki Outboards.  About 50% of the time, you will also require our 990C0-88136 cable as well.  Please contact us and we will help you figure out if you need this additional cable, or not.

If you own a 2013 or newer Suzuki Outboard, with a Lowrance (HDS or Elite), Garmin (ECHOMap or GPSMap), Simrad (GO, NSX, NSS evo3S or NSO evo3S), or Humminbird (Solix or Apex) fish finder(s), this is the kit for you.

If you own a Humminbird Helix – Please see our bundles specifically for Suzuki and Humminbird Helix

*Free Shipping Applies to Countries Listed here

 

Suzuki NMEA Cable V3.5 Firmware (2013 -> NOW Date of Manufacture)

This Suzuki Manufactured NMEA 2000 cable contains V3.5 Firmware and is specifically designed for Suzuki Outboards Manufactured 2013 and after.

These cables can be used with any model from 9.9 to 300 HP.

3 in stock (can be backordered)

Better Connected™ Suzuki 990C0-88136 Cable (Suzuki SMIS to SDS Adapter Equiv 990C0-88136)

(Required about 50% of the time.)

Before ordering this bundle, please contact us to let us help determine if you need this additional adapter cable. Or, if you have checked inside your outboard and can see that it contains a 4 pin connection identical to the connector photo shown on this adapter cable's web page, then you do not need this adapter cable for your installation.

Better Connected™ NMEA Power Cable

By default, this kit comes with a fused power lead. This is used when you are either connecting power directly from your battery, or if you are taking power from a power lead going to other devices, like the power circuit going to your fish finder. If you have a fusebox on your boat, with open/empty/unused fuse locations and want to add the NMEA network fuse into the power circuit there, then you should choose the unfused power lead.

Better Connected™ NMEA Backbone Cable (10'/3m, 15'/5m 20'/7m)

This cable needs to span the distance from your stern electrical area to your helm electrical area. 10 foot is common for most midships console boats under 23' long. 15 feet is needed about 5% of the time. Tiller steered boats do not require any Backbone Cable. Tiller owners should set the quantity of this cable to 0, below.

Description

This is our Suzuki NMEA Complete Bundle (2013+) for Suzuki Outboards manufactured after 2013, and Lowrance, Garmin, Humminbird, or Simrad fish finders.

 

Fishfinder Compatibility

Firstly, you need a Fish Finder with NMEA capability:

Lowrance
  • Elite Series
  • HDS Series
SimRad
  • GO Series
  • NSX Series
  • NSS evo3S Series
  • NSO evo3S Series
Garmin
  • GPSMAP Series
  • ECHOMAP Series – All Current Models.  Please contact us if your Echomap is an earlier model than 2015.  We need to ensure there is support for NMEA 2000.
Humminbird
Outboard Compatibility

Secondly, your Suzuki Outboard needs to be:

  • 2013 or newer Suzuki Outboard.
  • About half the time, your outboard may also require another adapter cable, model number 990C0-88136).

The Suzuki NMEA Complete Bundle contains absolutely everything you need to connect your fish finder to your engine.  However, there are some models which also require the Suzuki SMIS to SDS Adapter Cable:

Better Connected™ Suzuki SMIS to SDS Cable

With this kit, you will see fuel consumption rate, oil pressure, engine temperature, RPM, alternator voltage, fuel pressure, water pressure, and engine hours.  Many Suzuki Outboards will also provide trim data.

After that, you can also grow the system by adding other devices later as you want.

In addition, your new NMEA network is also an essential part of your trolling motors auto pilot capability with your fish finder

For further information on Marine Electrical DIY Tips, try our YouTube Channel:

Golden Channels on YouTube

Finally, we love talking engines, fish finders, and networking.  If you need help, please email us and we can help:

Contact Golden Channels

Fish Finder “Complications”
  • Sorry, the Lowrance Hook Series, and most of the smaller Garmin fish finders do not have NMEA networking.
  • SIMRAD Cruise Series is not NMEA capable.
  • Please contact us directly if you are using one of the following discontinued Garmin fish finders:  echoMAP CHIRP 52cv, echoMAP CHIRP 52dv, echoMAP CHIRP 53cv, echoMAP CHIRP 53dv, echoMAP CHIRP 54cv, echoMAP CHIRP 54dv, echoMAP CHIRP 55cv, echoMAP CHIRP 55dv, ECHOMAP Plus 62cv, ECHOMAP Plus 64cv and ECHOMAP Plus 65cv.  These models require an adapter cable that was included with the product.  If you no longer have this cable, this kit will additionally require Garmin PN 010-12445-10.  Since this is a proprietary Garmin cable, we do not stock it.

Additional information

Weight 1.3 lbs
Dimensions 11 × 9 × 1 in

Better Connected™ Suzuki 990C0-88136 Cable (Suzuki SMIS to SDS Adapter Equiv 990C0-88136)

Cable Length

6 foot, 1 foot

Better Connected™ NMEA Power Cable

Integral Fuse

Fused, Unfused

Better Connected™ NMEA Backbone Cable (10'/3m, 15'/5m 20'/7m)

Cable Length

10 foot, 15 foot, 20 foot

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.