Better Connected™ Suzuki NMEA Complete Bundle & Lowrance/Garmin/Humminbird/Simrad (Free Shipping*)

From: CAD $244.98

This is our Better Connected™ Complete NMEA Kit for most Suzuki Outboards.  Some, but not all, models will also require our 990C0-88136 cable as well.  Please see the details below.

Confused about exactly which NMEA components you need to connect your fish finder to your outboard?

Relax – the pros here at Golden Channels have you covered.  And, we only use the best quality and safest cable and components in our manufacturing.  Please check out the details of our manufacturing quality in the photos.

If you own a 2013 or newer Suzuki Outboard, with a Lowrance Elite or HDS Fishfinder, this is the kit for you.  If you have the 9.9 thru 30 HP, or 150/175/250/300, please contact us with your SN for help checking if you need this additional cable.

*Free Shipping Applies to Countries Listed here

Suzuki NMEA Cable + Tee (2013+ c/w V3.5 Firmware or 2008+ c/w V2.7 Firmware) - Free Shipping*

This Suzuki Manufactured NMEA 2000 cable is available in two different versions.

➼ If your outboard is made in 2013 or newer, Suzuki PN is 990C0-88149-357 and firmware V3.5 is programmed into the cable.

➼ If your outboard is made in 2008 thru 2012, Suzuki PN is 990C0-88149-294 and firmware V2.7 is programmed into the cable.

These cables can be used with any model from 9.9 to 300 HP. However, the following models will also require an additional cable (990C0-88136) for a complete installation:

4 stroke 9.9 thru 30 HP and 4 stroke 100/150/175/250/300 HP

Also comes as part of a complete kit for Lowrance, Garmin, Humminbird, or Simrad fish finders.

*Free Shipping Applies to Countries Listed here

Better Connected™ Suzuki 990C0-88136 Cable (Suzuki SMIS to SDS Adapter Cable Equiv 990C0-88136)

You need to add this gender changing cable if you have one of the following Suzuki HP models:

Four Stroke 9.9HP thru 30HP, 100HP, 150HP, 175HP, 250HP, 300HP

Better Connected™ NMEA Power Cable

By default, this kit comes with a fused power lead. This is used when you are either connecting power directly from your battery, or if you are taking power from a power lead going to other devices, like the power circuit going to your fish finder. If you have a fusebox on your boat, with open/empty/unused fuse locations and want to add the NMEA network fuse into the power circuit there, then you should choose the unfused power lead.


This is our Suzuki NMEA Complete Bundle (2013+) for 2013 and newer Suzuki Outboards, and Lowrance, Garmin, Humminbird, or Simrad fish finders.


Fishfinder Compatibility

Firstly, you need a Fish Finder with NMEA capability:

  • Elite Series
  • HDS Series
  • GO Series
  • NSX Series
  • NSS evo3S Series
  • NSO evo3S Series
  • GPSMAP Series
  • ECHOMAP Series
  • Solix Series
  • Apex Series
  • See Fish Finder “Complications” notes for earlier Helix series
Outboard Compatibility

Secondly, your Suzuki Outboard needs to be:

  • 2013 or newer Suzuki Outboard.
  • (See notes below for models including the Four Stroke 9.9 through 30HP and DF150G/175G/250AP/300AP – they will also require another adapter cable, model number 990C0-88136).

The Suzuki NMEA Complete Bundle contains absolutely everything you need to connect your fish finder to your engine.  However, there are some models which also require the Suzuki SMIS to SDS Adapter Cable:

Better Connected™ Suzuki SMIS to SDS Cable

With this kit, you will see fuel consumption rate, oil pressure, engine temperature, RPM, alternator voltage, fuel pressure, water pressure, and engine hours.

After that, you can also grow the system by adding other devices later as you want.

In addition, your new NMEA network is also an essential part of your trolling motors auto pilot capability with your fish finder

For further information on Marine Electrical DIY Tips, try our YouTube Channel:

Golden Channels on YouTube

Finally, we love talking engines, fish finders, and networking.  If you need help, please email us and we can help:

Contact Golden Channels

Fish Finder “Complications”
  • Humminbird Helix series forces you to buy not one, but two additional, proprietary cables to connect the NMEA capability to the NMEA Network.  In Conclusion, these are prohibitively expensive and almost justify a fish finder upgrade to a higher series to save overall cost.
  • Sorry, the Lowrance Hook Series, and most of the smaller Garmin fish finders do not have NMEA networking.
  • SIMRAD Cruise Series is not NMEA capable.

Additional information

Weight 1.3 lbs
Dimensions 11 × 9 × 1 in

Suzuki NMEA Cable + Tee (2013+ c/w V3.5 Firmware or 2008+ c/w V2.7 Firmware) - Free Shipping*

Model Year Supported Starts

2008, 2013

Better Connected™ NMEA Power Cable

Integral Fuse

Fused, Unfused


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.