Striving to be the Gold Standard of Quality and Safety
Everything we ship is tested by us in North America
We’re a small company by electronic manufacturing standards, but we have a lower warranty replacement rate than many large, brand name electronic manufacturers. How can that be?
Any well run electronics manufacturing company has to be serious about testing. This not only ensures your installation goes smoothly, but it allows us to offer our “Now You’re Golden” Guarantee. Basically, since we test every product we sell in our own offices prior to sending them to you, we eliminate any chance that your installation won’t be perfect.
To do this, we not only use some industry standard diagnostic tools, but we custom designed some of our own as well. Our production cable tester subjects a standard NMEA backbone cable 16 different ways before it is sent for packaging. All conductors are individually checked for end to end continuity, and each conductor is checked for shorts to another conductor, or to the cable shield.
Lastly, we fulfill our orders through our own warehouses that are stocked from our own factories. This ensures any product with our label is, indeed, our product.
That is why many boat dealerships, boat manufacturers, and professional mechanics trust us to supply their NMEA 2000 cabling needs.
Better Parts. Higher Temperature Specifications. Compliance with Standards.
Outboard cables need to survive vibration, heat, and fuels.
Our outboard cables are the only ones with both a UL rating, plus an operating temperature specification of 105C/ 220F. Our outboard cable has a very thick jacket to prevent failure from rubbing or vibration, it’s double shielded. We even choose our heat shrink based on its tolerance for being exposed to petroleum products.
We are strict about connector sourcing. We only source the seals and connectors from the Japanese manufacturer that your outboard manufacturer uses. We never use a knock off to save money. Using the same manufacturer of connector as your outboard ensures a proper connection with your outboards wiring harness..
We only use tinned conductors. Many have both 1426 and SAE ratings.
Standards, Regulations, and Certifications
Here is a list of Standards that apply to out products, based on intended use and geographic market:
- UL 758 (Standard Temperature Multiconductor shielded NMEA Cables)
- UL 758 Style 2450 AWM 300V (Multiconductor shielded 105C rated NMEA Cables)
- UL1426 (single strand)
- WiFi Certified, FCC Part 15, part B for WiFi Radio, IC Certified.
- CE EN IEC 62368-1:2020 + A11:2020 (Safety)
- EN 50665:2017, EN IEC 62311:2020 (Health)
- EN 55032:2015 + A11:2020, EN55035:2017 + A11:2020, ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4 (EMC)
- ETSI EN300 328 V2.2.2 (Radio)
- EN 2014/35 Low Voltage Directive
- IEC 60092-370 (Cable/wire suitability for Marine Use)
- SAE J1128 AWM MTW (single strand)
We Care about our Customers.
We hire manufacturing staff that strive to be produce the best products possible. We answer the phone and our emails. We never give up, but if you ever want to just start over, we respect that. That’s the reason behind our “Now You’re Golden” Guarantee. We earn our reviews and we love helping our customers.